TM 1-1520-238-23
Change 6
3-120.1/(3-120.2 blank)
3.34.
TAIL LANDING GEAR ACTUATING CYLINDER LOCK SWITCH ASSEMBLY
REPLACEMENT – continued
d. Install clamp (7) on bracket (9).
(1) Install clamp (7) on cable (8).
(2) Install screw (10) through washer (12.1),
clamp (7), spacer (12.2), and bracket (9).
(3) Hold screw (10). Install washer (12) and nut
(11).
e. Install receptacle J760 (2) on bracket (3).
(1) Aline receptacle J760 (2) on bracket (3).
(2) Install four screws (4) through bracket (3).
(3) Hold four screws (4). Install nuts (5) and
washers (6).
f. Attach connector P760 (1) to receptacle J760
(2).
g. Inspect (QA).
h. Perform tail landing gear maintenance opera-
tional check (TM 1-1520-238-T).
END OF TASK
12
11
9
10
12.1
7
12.2
M04-2341-6A
8
M04-2341-7
3
5
6
1
2
4
