TM 1-1520-238-23
3-121
3.35.
TAIL LANDING GEAR ACTUATING CYLINDER LOCK RELEASE HANDLE
REPLACEMENT
3.35.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation. Adjustment.
3.35.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Retaining ring pliers (item 227, App H)
Materials/Parts:
Wire (item 224, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
3.35.3. Removal
a. Remove lock release handle (1) from lock ac-
tuating cylinder (2).
(1) Remove two extension helical springs (3)
from handle (1).
(2) Remove two retaining rings (4) and washers
(5) from pin (6).
(3) Remove pin (6) from handle (1) and linkage
attachment point (7).
(4) Remove two retaining rings (8) and two
washers (9) from pin (10).
(5) Remove pin (10) from handle pivot point (11).
(6) Remove handle (1).
(7) Remove two retaining rings (12) from pin
(13).
(8) Remove pin (13) from handle (1).
GO TO NEXT PAGE
M04-2294-1
7
11
1
3
8
9
8
9
1
2
10
4
5
12
7
6
5
4
12
13
1
