TM 1-1520-238-23
3-123
3.35.
TAIL LANDING GEAR ACTUATING CYLINDER LOCK RELEASE HANDLE
REPLACEMENT – continued
3.35.7. Adjustment
a. Adjust handle (1).
(1) Lower handle (1) until it does not automatical-
ly reverse.
(2) Back out bolt (14) until bolt head reaches
cylinder (2).
(3) Turn bolt (14) into handle (1) five turns.
(4) Hold bolt (14). Tighten nut (15).
(5) Raise and lower handle (1) to check for prop-
er operation.
(6) Lockwire bolt (14) to handle (1). Use wire
(item 224, App F).
b. Inspect (QA).
END OF TASK
FULL DOWN
FULL UP
2
1
M04-2294-2
15
14
