TM 1-1520-238-23
3-125
3.36.
TAIL LANDING GEAR ACTUATING CYLINDER WHEEL LOCK TARGET
REPLACEMENT – continued
3.36.4. Cleaning
a. Clean cylinder and removed and attaching
parts (para 1.47).
3.36.5. Inspection
a. Check removed and attaching parts (para
3.28).
3.36.6. Installation
a. Install target (1) in cylinder (2). Torque target
(1) to 20 INCH-POUNDS.
(1) Lubricate threads of target (1). Use lubricant
(item 113, App F).
(2) Install target (1) in cylinder (2). Use strap
wrench and crowfoot.
(3) Torque target (1) to 20 INCH-POUNDS. Use
torque wrench.
(4) Move lever (13) up to target (1).
(5) Slide pin (5) through cylinder (2) and lever
(13).
(6) Install two washers (12) and rings (11) on pin
(5).
(7) Slide pin (10) in target (1).
(8) Install two rollers (9), washers (8), and retain-
ing rings (7) on pin (10).
(9) Install two springs (4) on pins (5) and (6).
b. Install and adjust tail landing gear lock switch
assembly (para 3.35).
GO TO NEXT PAGE
6
13
9
10
1
8
7
2
5
11
12
M04-2370-8
4
4
