TM 1-1520-238-23
3-127
3.37.
TAIL LANDING GEAR ACTUATING CYLINDER FUSE PIN REPLACEMENT
3.37.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
3.37.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
0 - 75 inch-pound 1/4-inch drive dial indicator torque
wrench (item 446, App H)
Materials/Parts:
Bolt 1/4-28 x 3-inch (for removal)
Brush (item 34, App F)
Epoxy primer coating kit (item 78, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
3.37.3. Removal
a. Remove fuse pin (1) from actuating cylinder
(2).
(1) Remove self-locking screw (3) from pin (1).
(2) Install 1/4-28 x 3-inch bolt (4) into pin (1) tem-
porarily.
(3) Remove pin (1) from cylinder (2) with bolt (4).
(4) Remove bolt (4) from pin (1).
3.37.4. Cleaning
a. Clean removed and attaching parts (para
1.47).
3.37.5. Inspection
a. Check removed and attaching parts (para
3.28).
GO TO NEXT PAGE
M04-2346-1
2
1
4
1
4
2
3
1
