TM 1-1520-238-23
Change 1
4-655
4.183.
NO. 2 ENGINE POWER AVAILABLE SPINDLE (PAS) RIGGING PROCEDURE – continued
i. Remove –3 rig pin (8) from bracket (9) and
bellcranks (10) and (11).
j. Move power levers (3) and (7) to OFF, IDLE,
FLY, LOCKOUT, and back to IDLE.
k. Install –3 rig pin (8) fully in bracket (9) and
bellcranks (10) and (11).
l. At PAS gearbox (18), verify pinion shaft (19) is
at 26 degree position.
GO TO NEXT PAGE
11
M04-1208-25
10
8
9
M04-1208-35A
7
3
11
10
M04-1208-42
9
8
26 DEGREES
M04-1208-34A
18
19
