TM 1-1520-238-23
9-520
9.136.
MASS TERMINATION CONNECTOR (MTC) WITH SHIELD BUS (1 OR 2 INCH) REPAIR – continued
n. Isolate wafer sleeves (13) to be removed with
heat shields (22) with one shield (22) on each
side of sleeve (13).
o. Remove wire (12) from wafer (6). Use heat,
nitrogen (item 128, App F) (if on helicopter), gun
kit and tweezers.
(1) Heat sleeve (13) until solder melts.
(2) While solder is melting, pull wire (12) free of
sleeve (13). Use tweezers.
(3) Remove sleeve (13) and excess solder from
wafer terminal (23).
(4) Repeat steps (1) thru (3) for all wires (12)
marked for removal.
p. Repeat steps c. thru o. for wafer (9).
GO TO NEXT PAGE
12
13
22
6
23
M04-3066-34
M04-3066-43
9
