TM 1-1520-238-23
10-168
10.32.
AFT FUEL CELL ACCESS PANEL AND ACCESS COVER REMOVAL/INSTALLATION
10.32.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
10.32.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Electrical tool kit (item 378, App H)
Light duty laboratory apron (item 27, App H)
13/16 x 3/8-inch drive open end socket wrench
crowfoot attachment (item 92, App H)
Chemical protective gloves (item 154, App H)
Multimeter (item 215, App H)
Adjustable air filtering respirator (item 262, App H)
1 1/16 & 1 1/4-inch open end wrench (item 416, App H)
1 3/16 & 1 1/4-inch open end wrench (item 420, App H)
1 3/8 & 1 7/16-inch open end wrench (item 421, App H)
30 - 150 inch-pound 3/8-inch drive click type torque
wrench (item 441, App H)
Materials/Parts:
Packing (3)
Packing with retainer (76)
Petrolatum (item 138, App F)
Sealing compound (item 175, App F)
Wire (item 224, App F)
Personnel Required:
67R
Attack Helicopter Repairer
68X
Armament/Electrical System Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-238-T
TM 55-1500-323-24
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
10.2
Fuel system safety precautions observed
2.84
Catwalk removed
10.30
Aft fuel cell upper vent tube removed
6.8
No. 4 drive shaft removed
10.32.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
b. On pilot center circuit breaker panel, open
ENG INST, FUEL XFEED, and FUEL XFER cir-
cuit breakers.
GO TO NEXT PAGE
M04-0354-1
