TM 1-1520-238-23
11-92
Change 2
11.13.
LONGITUDINAL LINKS REMOVAL/INSTALLATION – continued
NOTE
This task is typical for either longitudinal
link.
11.13.3. Removal
a. Remove longitudinal link (1) from aft longitu-
dinal bellcrank (2).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (3).
(3) Remove nut (4).
(4) Remove bolt (5), nylon washer (6), washer(s)
(7) (if installed), and bushing (8).
b. Remove link (1) from forward longitudinal
bellcrank (9).
(1) Remove sealant from attaching hardware
(para 1.47).
(2) Remove and discard cotter pin (10).
(3) Remove nut (11).
(4) Remove bolt (12), washer(s) (13) (if
installed), and bushing (14).
11.13.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.13.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
GO TO NEXT PAGE
M04-1713-1
2
M04-1713-2
1
6
8
4
5
TYPICAL 2 PLACES
3
7
10
M04-1713-3
12
14
9
13
1
11
