TM 1-1520-238-23
11-374
Change 4
11.85.
CPG CYCLIC STICK FLIGHT CONTROL ARM ASSEMBLY DISASSEMBLY/ASSEMBLY
(AVIM)
11.85.1. Description
This task covers:
Disassembly. Cleaning. Inspection. Assembly.
11.85.2. Initial Setup
Tools:
Aircraft mechanics tool kit (item 376, App H)
Airframe repairmans tool kit (item 377, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
30 - 150 inch-pound 1/4-inch drive click type torque
wrench (item 435, App H)
Materials/Parts:
Cotter pin (3)
Packing
Rivet MS20470AD3 (3)
Adhesive (item 3A, App F)
Damping fluid (item 69, App F)
Petrolatum (item 138, App F)
Personnel Required:
67R
Attack Helicopter Repairer
68G
Aircraft Structural Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1500-204-23
11.85.3. Disassembly
a. Remove flight control arm assembly (1) from
cyclic support (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4) and washer (5).
(3) Remove bolt (6) and washer (5).
(4) Remove two spacers (7), retainers (8), and
arm (1).
GO TO NEXT PAGE
M04-4301-2
5
4
3
7
8
8
1
2
7
6
5