TM 1-1520-238-23
11-776
11.175. PILOT PEDAL ADJUST HANDLE SUPPORT ASSEMBLY REMOVAL/INSTALLATION – continued
b. Install pedal adjust handle (6) on support (7).
Torque nut (9) to 30 to 40 INCH-POUNDS.
(1) Aline handle (6) on support (7).
(2) Install bolt (10) through washer (11), handle
(6), and support (7).
(3) Check fit of self-retaining bolt (10) (para
11.1).
(4) Install nut (9). Torque nut (9) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (8).
c. Install cover plates (1), (2), and (3) on center
console (4).
(1) Aline plates (1), (2), and (3) on console (4).
(2) Secure 12 fasteners (5).
d. Inspect (QA).
END OF TASK
10
11
9
6
M04-4415-7
7
8
M04-4415-8
1
4
5
5
2
3
5
