TM 1-1520-238-23
11-876
11.200.
CPG LONGITUDINAL CONTROL POSITION LINEAR VARIABLE DIFFERENTIAL TRANSDUCER
(LVDT) REMOVAL – continued
c. Detach connector P236 (1) from receptacle
J236 (2).
d. Remove two clamps (3) from LVDT wire har-
ness (4).
(1) Remove nut (5), two screws (6), washers (7),
and spacer (8) from two clamps (3).
(2) Remove two clamps (3).
e. Remove connector (1) from wire harness (4), if
required (TM 55-1500-323-24).
NOTE
On BUCS-equipped aircraft, an electrical
lead will be attached to LVDT.
f. Remove electrical lead (9) from ground stud
(10).
(1) Remove nut (11) and washer (12).
(2) Remove lead (9) from stud (10).
g. Remove clamp (13) from LVDT (14).
(1) Remove nut (15) and washer (16).
(2) Remove bolt (17), washer (16), lead (9), and
washer (18).
(3) Remove clamp (13) from LVDT (14).
GO TO NEXT PAGE
M04-1855-2
VIEW LOOKING UP AND AFT
2
1
3
7
4
7
6
3
6
8
5
11
12
M04-1855-3
10
9
18
9
13
14
15
17
16
