TM 1-1520-238-23
11-1266
11.295.
RIGGING PILOT AND CPG DIRECTIONAL PEDAL STOP BOLTS – continued
h. Remove -9 rig pin (5) from SPAD (1).
i. Back off pilot directional pedals left limit stop
bolt (11) and right limit stop bolt (12).
(1) Remove lockwire from bolts (11) and (12).
(2) Loosen nut (13) and turn stop bolt (11) clock-
wise into bracket (14).
(3) Loosen nut (13) and turn stop bolt (12) clock-
wise into bracket (14).
j. Back off CPG directional pedals left limit stop
bolt (15) and right limit stop bolt (16).
(1) Remove lockwire from bolts (15) and (16).
(2) Loosen nut (17) and turn stop bolt (15) clock-
wise into bracket (18).
(3) Loosen nut (17) and turn stop bolt (16) clock-
wise into bracket (18).
k. Observe directional servocylinder piston (19)
travel.
l. Fully retract piston (19) by slowly moving pilot
right pedal (3) forward.
(1) Slowly push pedal (3) forward until piston (19)
is fully retracted.
(2) Hold pedals (2) and (3) in this position.
GO TO NEXT PAGE
13
11
14
1
5
12
M04-3028-5
13
M04-3028-6
15
17
16
18
17
19
PILOT STATION
2
3
M04-3028-7
