TM 1-1520-238-23
Change 8
16-45
16.7.
PYLON RACK EJECTOR DISASSEMBLY/ASSEMBLY - continued
b. Clean ejector housing.
(1) Clean small bore hole in ejector housing. Use
brush (item 37, App F) and dry cleaning
solvent (item 74, App F).
(2) Clean large bore hole in ejector housing. Use
brush (item 38, App F) and dry cleaning
solvent (item 74, App F).
(3) Clean cartridge bore hole in ejector housing.
Use dry cleaning solvent (item 74, App F)
and cloth (item 52, App F).
16.7.5. Inspection
a. Check ejector housing for cracks. Use
magnifier. None allowed.
b. Check, piston, plunger, and retainers for
cracks and distortion. None allowed.
c. Check piston, ejector, plunger, and retainers
for corrosion (para 1.49).
16.7.6. Assembly
a. Assemble retainer (12).
(1) Lubricate new packings (14) and (16). Use
damping fluid (item 69, App F).
(2) Install packings (14) and (16) on retainer (12).
(3) Install new piston ring (15) in retainer (12).
GO TO NEXT PAGE
M04-1215-13A
16
15
11
12
14
