TM 1-1520-238-23
Change 8
16-43
16.7.
PYLON RACK EJECTOR DISASSEMBLY/ASSEMBLY - continued
16.7.3. Disassembly
a. Remove plug (1) from ejector (2).
(1) Remove lockwire from plug (1).
(2) Remove plug (1) from ejector (2).
(3) Remove and discard packing (3).
b. Remove orifice (4) from ejector (2).
(1) Remove and discard packing (5).
c. Remove plunger retainer (6) and detent ring
(7) from ejector (2).
(1) Remove lockwire from retainer (6).
(2) Remove retainer (6) from ejector (2).
(3) Remove detent ring (7) from retainer (6).
d. Remove plunger (8) from ejector (2).
(1) Remove and discard packing (9).
e. Remove bolt (10) from ejector piston (11).
(1) Hold open end wrench on flats of piston (11).
(2) Remove bolt (10) from piston (11).
GO TO NEXT PAGE
2
5
M04-1215-7
1
2
4
3
M04-1215-8
2
9
8
7
6
11
10
M04-1215-26A
VIEW LOOKING UP
