TM 1-1520-238-23
16-46
Change 8
16.7.
PYLON RACK EJECTOR DISASSEMBLY/ASSEMBLY - continued
b. Install piston (11) in retainer (12).
(1) Lubricate new packing (13). Use damping
fluid (item 69, App F).
(2) Install packing (13) on piston (11).
(3) Insert piston (11) in retainer (12).
c. Install retainer (12) and piston (11) in housing
(17). Torque retainer (12) to 230 INCH-POUNDS.
(1) Install piston (11) with retainer (12) in housing
(17).
(2) Torque retainer (12) to 230 INCH-POUNDS.
Use torque wrench, torque wrench adapter,
and socket.
(3) Lockwire retainer (12) to ejector (2). Use wire
(item 230, App F).
d. Install bolt (10) in ejector piston (11).
(1) Hold open end wrench on flat of piston (11).
Install bolt (10) in piston (11).
e. Install plunger (8) in plunger port (18).
(1) Lubricate new packing (9). Use damping fluid
(item 69, App F).
(2) Install packing (9) on plunger (8).
(3) Install plunger (8) in port (18).
GO TO NEXT PAGE
M04-1215-29A
11
13
12
11
12
M04-1215-30A
17
2
11
10
M04-1215-31A
M04-1215-17A
8
9
18
