TM 1-1520-238-23
Change 8
16-47
16.7.
PYLON RACK EJECTOR DISASSEMBLY/ASSEMBLY - continued
f. Install plunger retainer (6) in port (18). Torque
retainer (6) to 180 INCH-POUNDS.
(1) Install ring (7) on retainer (6).
(2) Install retainer (6) in port (18).
(3) Torque retainer (6) to 180 INCH-POUNDS.
Use torque wrench.
(4) Lockwire retainer (6) to ejector (2). Use wire
(item 230, App F).
g. Install new packing (5) in bore (19).
(1) Lubricate packing (5). Use damping fluid
(item 69, App F).
h. Install orifice (4) in bore (19).
(1) Tighten orifice (4) until threads bottom out.
i. Install plug (1) in bore (19). Torque plug (1) to
125 INCH-POUNDS.
(1) Lubricate new packing (3). Use damping fluid
(item 69, App F).
(2) Install new packing (3) in groove of plug (1).
(3) Install plug (1) in bore (19).
(4) Torque plug (1) to 125 INCH-POUNDS. Use
torque wrench and screwdriver bit set.
(5) Lockwire plug (1) to housing (2). Use wire
(item 230, App F).
j. Inspect (QA).
END OF TASK
M04-1215-18A
7
18
6
2
M04-1215-19A
2
1
1
3
4
5
19
VIEW LOOKING DOWN
