TM 1-1520-238-23
Change 8
16-85
16.18.
PYLON WIRE HARNESS REPLACEMENT - continued
m. Remove two clamps (53), screws (54), wash-
ers (55), and nuts (56) from bracket (57).
(1) Hold two screws (54). Remove two nuts (56).
(2) Remove two screws (54), washers (55) and
clamps (53) from bracket (57).
(3) Remove two clamps (53) from harness (19).
n. Depin six wires (58) from terminal blocks (59)
and (60).
(1) Identify and depin six wires (58) from terminal
blocks (59) and (60) (TM 55-1500-323-24).
o. Remove harness (19) from pylon (61).
16.18.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
16.18.5. Installation
a. Install harness (19) on pylon (61).
b. Install two clamps (53), screws (54), washers
(55), and nuts (56) on bracket (57).
(1) Install two clamps (53) on harness (19).
(2) Aline two clamps (53) with bracket (57).
(3) Install two screws (54) and through clamps
(53), washers (55), and brackets (57).
(4) Hold two screws (54). Install nuts (56).
GO TO NEXT PAGE
56
55
54
55
57
53
53
M04-1219-8A
54
61
60
M04-1219-9
59
58
58
57
56
55
54
55
53
53
M04-1219-21A
54
54
56
55
57
53
54
55
53
57
56
