PYLON WIRE HARNESS REPLACEMENT - continued

PYLON WIRE HARNESS REPLACEMENT - continued - TM-1-1520-238-23-8_681

PYLON WIRE HARNESS REPLACEMENT - continued - TM-1-1520-238-23-8_683

TM-1-1520-238-23-8 Army Model AH-64 Helicopter (NSN
Page Navigation
645

TM 1-1520-238-23 16-88 Change 8 16.18. PYLON WIRE HARNESS REPLACEMENT - continued NOTE Install connector plate with keyways in aft position. Aline pin with plate. f. Install plate (42) on pylon (61). (1) Aline two holes on plate (42) with holes in pylon (61). (2) Install two screws (46) through washers (47) and plate (42), and into pylon (61). g. Install clamp (51) on bracket (52). (1) Install clamp (51) on wire harness 19). (2) Aline clamp (51) with bracket (52). (3) Install screw (49) through washer (50) and clamp (51), and into bracket (52). h. Attach connector P507 (36) to receptacle J507 (37) on pylon actuator (38). i. Install clamp (32) on pylon (61). (1) Install clamp (32) on harness (19). (2) Install screw (34) in pylon (61). (3) Install clamp (32), washer (35), and nut (33) on screw (34). (4) Hold screw (34). Tighten nut (33). j. Install clamp (27) on bracket (31). (1) Install clamp (27) on wire harness (19). (2) Install screw (28) through washer (29), clamp (27), spacer (30), and bracket (31). GO TO NEXT PAGE 47 46 M04-1219-13 61 42 19 M04-1219-14 52 51 49 50 M04-1219-15 38 37 36 M04-1219-17 19 31 30 29 28 27 32 34 33 35 19 33 32 35 61

Privacy Statement
Press Release
Contact