PYLON STOW BRACKET REMOVAL/INSTALLATION - continued

PYLON STOW BRACKET REMOVAL/INSTALLATION - continued - TM-1-1520-238-23-8_673

TM-1-1520-238-23-8 Army Model AH-64 Helicopter (NSN
Page Navigation
637

TM 1-1520-238-23 16-80 Change 8 16.17. PYLON STOW BRACKET REMOVAL/INSTALLATION - continued 16.17.7. Installation a. Install forward brace bracket (1) on frame (2). Torque nuts (3) to 225 INCH-POUNDS. (1) Position bracket (1) on frame (2) and aline holes. (2) Insert bolt (11) with washer (6) and washer (4) through center hole. (3) Install washers (4) and nut (3) on bolt (11). (4) Insert bolt (10) washer (8) and washer (9) through top hole. (5) Install washer (9) washer (8) and nut (7). (6) Insert bolt (5) with washer (6) and washer (4) through bottom hole. (7) Hold bolt (5). Torque nut (3) to 225 INCH- POUNDS. Use torque wrench. (8) Hold bolt (11). Torque nut (3) to 225 INCH- POUNDS. Use torque wrench. b. Attach all connectors and wire harness to stow bracket (para 16.18). c. Inspect (QA). d. Secure pylon fairing P1 (para 2.2). e. Install pylon rack ejector impulse cartridge (para 16.3). END OF TASK 6 4 2 9 M04-2850-8A 8 10 4 11 5 6 4 3 4 7 8 9 1

Privacy Statement
Press Release
Contact