TM 1-1520-238-T-7 11–288 11–60. PILOT CYCLIC GRIP NO-GO PLT COMPARTMENT – APPEARS ON HOD 11–60 Tools: Nomenclature Part Number Tool Kit, Electrical SC518099CLA06 Repairer’s Multimeter, Digital AN/PSM-45 Personnel Required: 68X Armament/Electrical Systems Repairer References: TM 1-1520-238-T-6 TM 1-1520-238-23 Equipment Conditions: Ref Condition TM 1-1520-238-23 Access provisions – R295 door open WARNING Turn off power before detaching or attaching wires and connectors. High current 28 VDC or 115 VAC is present. Failure to do so could result in death or serious injury. 1. On pilot cyclic stick, set FORCE TRIM REL switch to OFF. Check for 28 VDC at P686–117. Is voltage present? YES Go to step 2. NO Go to step 3. 2. Check for short between (A401): P113–A9 and P113–A5, P113–A10 and P113–A5, P113–A11 and P113–A5. Does short exist? YES Replace pilot cyclic stick (TM 1-1520-238-23). NO Repair shorted wire between: J113–A5 and J403–A13, P403–A13 and J447–B7, P447–B7 and P686–117, J113–A11 and P423–B15, J113–A10 and P423–B16, J113–A9 and P423–B7. Go to paragraph 11–23. 3. Check for 28 VDC at P686–116. Is voltage present? YES Go to step 4. NO Go to step 8. 4. With positive meter lead at (A402): TB3–7/8–F, check for short between TB3–7/8–F and TB3–7/8–A. Does short exist? YES Replace terminal board (electronic module) (A402)TB3–7/8 (TM 1-1520-238-23). NO Go to step 5. 5. Check for short between (A402): J11–B15 and J11–B14. Does short exist? YES Repair shorted wire between (A402): J11–B15 and TB2–29–E, J11–B14 and TB2–29–F. Go to paragraph 11–23. NO Go to step 6.