TM 1-1520-238-23
11-285
11.61.
PILOT CYCLIC STICK HOUSING ASSEMBLY DISASSEMBLY/ASSEMBLY (AVIM) – continued
11.61.7. Assembly
a. If removed, install bolt (26) and nut (27) on
housing (4).
NOTE
Refer to dimension C as recorded earlier.
(1) Install bolt (26) on housing (4) until dimension
C is attained.
(2) Install nut (27).
b. If removed, install bolt (24) and nut (25) on
housing (4).
NOTE
Refer to dimension B as recorded earlier.
(1) Install bolt (24) on housing (4) until dimension
B is attained.
(2) Install nut (25).
(3) Lockwire nut (25) to housing (4). Use wire
(item 224, App F).
c. If removed, install two bolts (22) and nuts (23)
on housing (4).
NOTE
Refer to dimensions A as recorded earli-
er.
(1) Install two bolts (22) through housing (4) and
nuts (23) until dimension A is attained.
(2) Tighten two nuts (23).
(3) Lockwire two bolts (24) together. Use wire
(item 224, App F).
(4) Lockwire two nuts (23) and nut (27) together.
Use wire (item 224, App F).
GO TO NEXT PAGE
M04-4293-6
4
25
23
24
23
22
22
27
26
