TM 1-1520-238-23
11-288
Change 4
11.62.
PILOT CYCLIC STICK FLIGHT CONTROL ARM ASSEMBLY DISASSEMBLY/ASSEMBLY
(AVIM)
11.62.1. Description
This task covers:
Disassembly. Cleaning. Inspection. Assembly.
11.62.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Airframe repairman’s tool kit (item 377, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
30 - 150 inch-pound 1/4-inch drive click type torque
wrench (item 435, App H)
Materials/Parts:
Cotter pin (3)
Packing
Rivet MS20470AD3 (3)
Adhesive (item 3A, App F)
Damping fluid (item 69, App F)
Petrolatum (item 138, App F)
Personnel Required:
67R
Attack Helicopter Repairer
68G
Aircraft Structural Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1500-204-23
Equipment Conditions:
Ref
Condition
11.64
Pilot cyclic lateral SPAD switch removed
11.62.3. Disassembly
a. Remove flight control arm (1) from cyclic sup-
port (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4) and washer (5).
(3) Remove bolt (6) and washer (5).
(4) Remove two spacers (7) and retainers (8)
from arm (1).
GO TO NEXT PAGE
M04-4295-2
2
3
6
5
5
4
7
8
1
8
7
