TM 1-1520-238-23
11-286
Change 4
11.61.
PILOT CYCLIC STICK HOUSING ASSEMBLY DISASSEMBLY/ASSEMBLY (AVIM) – continued
d. Install housing (4) on support (2).
(1) Apply primer on bearing mount surface of
support (2). Use primer (item 145, App F).
(2) Allow primer to air dry 30 MINUTES.
(3) Apply sealing compound on bearing (20)
mount surface of support (2). Use sealing
compound (item 170, App F).
(4) Press bearing (20) on housing (4) (para 11.5).
(5) Install housing (4) on support (2).
(6) Ensure bearing (20) is properly seated in sup-
port (2).
(7) Install bearing (21) on housing (4) until prop-
erly seated in support (2).
e. Install clevis (15) on housing (4).
(1) Install pivot (19) through housing (4) and cle-
vis (15).
(2) Install bolt (18) through clevis (15), washer
(17), and nut (16).
(3) Install
new
rivet
(15.1)
dry
(TM 1-1500-204-23).
GO TO NEXT PAGE
M04-4293-7
21
4
2
20
4
15
17
16
18
19
15.1
M04-4293-8A
