TM 1-1520-238-23
11-638
11.144. CPG DIRECTIONAL SHEAR PIN ACTIVATED DECOUPLER (SPAD) REMOVAL – continued
d. Remove directional push-pull rod (8) from
SPAD (2).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10) and bushing (11).
(3) Remove bolt (12), washer (13), and bushing
(14).
e. Support SPAD (2) and remove directional
push-pull rod (15) from SPAD (2).
(1) Remove and discard cotter pin (16).
(2) Remove nut (17).
(3) Remove bolt (18), washer (19), and bushing
(20).
(4) Remove rod (15) to rear of SPAD (2) and
reinstall bolt (18).
f. Detach connector A334P1 (21) from recep-
tacle J273 (22).
g. Remove two wire clamps (23).
(1) Remove nut (24) and washer (25).
(2) Remove screw (26), top clamp (23), spacer
(27), and bottom clamp (23).
h. Remove two wire clamps (28).
(1) Remove two nuts (29) and washers (30).
(2) Remove two screws (31) and clamps (28).
GO TO NEXT PAGE
13
14
12
8
11
M04-1804-3
2
9
10
18
19
2
20
15
16
17
M04-1804-4
29
M04-1804-6
26
23
21
27
23
25
24
28
30
29
28
31
30
22
