TM 1-1520-238-23
Change 8
16-77
16.17.
PYLON STOW BRACKET REMOVAL/INSTALLATION
16.17.1. Description
This task covers:
Removal. Cleaning. Inspection. Repair. Installation.
16.17.2. Initial Setup
Tools:
Airframe repairman’s tool kit (item 377, App H)
Electrical tool kit (item 378, App H)
0 - 600 inch-pound 3/8-inch drive dial indicator torque
wrench (item 447, App H)
Personnel Required:
68G
Aircraft Structural Repairer
68X
Armament/Electrical System Repairer
68X3F
Armament/Electrical System Repairer/
Technical Inspector
References:
TM 1-1500-204-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Pylon fairing P1 opened
16.3
Pylon rack ejector impulse cartridge re-
moved
16.18
Connectors and wire harness detached
from stow bracket
16.17.3. Removal
a. Remove bracket (1) from pylon rack (2).
(1) Remove nut (3) and two washers (4) from
lower bolt (5).
(2) Remove bolt (5), washer (4), and washer (6).
(3) Remove nut (7) washer (8) and washer (9)
from top bolt (10).
(4) Remove bolt (10) washer (9), and washer (8).
(5) Remove nut (3) and washers (4) from center
bolt (11).
(6) Remove bolt (11) washer (4) and washer (6).
(7) Remove stow bracket (1) and forward sway
brace (29) from rack (2).
GO TO NEXT PAGE
M04-2850-1
6
4
2
9
M04-2850-2A
810
4
11
5
6
4
3
4
78
9
1
