TM 1-1520-238-23
8-100
Change 3
8.38.
PITOT STATIC SYSTEM TUBING TRANSITION REPLACEMENT – continued
(3) Apply adhesive to abraded surfaces on
smooth tubing (3) and inside each leg of tran-
sition (1). Use adhesive (item 9, App F).
(4) Apply adhesive to convoluted tubing (2).
(a) Fill in valleys of convoluted tubing being
installed in transition (1) 0.50 INCH. Use
adhesive (item 9, App F).
(5) Install smooth tubing (3) and convoluted tub-
ing (2) into transition (1).
(6) Apply heat to transition (1). Use protective
gloves and heater.
(7) Remove excess adhesive. Use methyl ethyl
ketone (item 124, App F) and cloth (item 52,
App F).
(8) Allow 24 HOUR cure time.
b. Inspect (QA).
c. Perform
pitot
static
system
test
(TM 1-1500-204-23).
d. Reapply system identification tape if removed
(TM 1-1500-204-23). Use marker (item 123,
App F).
END OF TASK
M04-3731-3
1
3
2
0.50
(TYP)
M04-3731-4
1
2
3
