TM 1-1520-238-23
Change 2
11-109
11.17.
LOAD BEARING SCISSOR DISASSEMBLY/ASSEMBLY
11.17.1. Description
This task covers:
Disassembly. Cleaning. Inspection. Assembly.
11.17.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
0.000 - 6.000-inch outside micrometer caliper set
(item 52, App H)
2 - 12-inch inside micrometer caliper (item 56, App H)
1 1/4 x 1/2-inch drive socket wrench socket (item 308,
App H)
1 1/16 & 1 1/4-inch open end wrench (item 416, App H)
0 - 300 inch-pound 3/8-inch drive click type torque
wrench (item 439, App H)
Materials/Parts:
Cotter pin
Laminated washers (2)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
11.16
Load bearing main rotor scissor removed
11.17.3. Disassembly
a. Remove lower arm (1) from upper arm (2).
(1) Remove and discard cotter pin (3).
(2) Hold bolt (4). Use open end wrench.
(3) Remove nut (5) and washer (6). Use socket.
(4) Remove bolt (4), flat washer (7), two bearings
(8), laminated washers (9), and bushings
(10).
(5) Discard two laminated washers (9).
11.17.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
GO TO NEXT PAGE
M04-1725-2
2
1
8
9
10
9
8
10
7
4
3
5
6
